Asphalt shingle options in Colleyville

Compare asphalt shingle styles, then consider the tested product and the roof system around it. Appearance is one part of the choice.

Call (817) 391-7321

Free roof inspections for Colleyville homes and buildings.

Cross-section stack of asphalt shingle samples showing layered material construction

Request a free roof inspection

Tell us where the roof is and what you noticed.

Choosing asphalt shingles for a Colleyville home

Shingle names can mix together three different subjects: the shape you see, the layers used to make it and the performance of the specific product. Sorting those subjects out makes the material conversation easier.

A dimensional profile does not establish an impact rating. A product rating does not establish how the finished roof will perform at a poorly installed valley or flashing. Choose the material alongside the details that complete the roof.

For a Colleyville house the practical choices are an architectural shingle, an impact-rated version of one, or a heavier designer profile. Three-tab matters mostly for repairs to roofs that already have it.

Fan of asphalt shingle color samples spread across a wood plank surface
Shingle color samples fanned out on a table. Illustrative photo.

Compare shingle styles for your Colleyville roof

Hip ridge line crossing gray three-tab asphalt shingle slopes

Three-tab

Regular cutouts create a flatter, repeating appearance across the slope. Product availability and the condition of the existing roof matter when considering a match for repair.

Close view of layered dark asphalt shingle tabs across a slope

Architectural

Laminated layers create depth and a less uniform outline. Compare the actual product specifications and accessories alongside its appearance on the house.

Extreme close-up of black scalloped shingle edges and mineral granules

Designer profiles

Special shapes and heavier visual profiles can change the roof’s character. The scalloped edges shown here illustrate how a shaped profile changes the look.

Illustrative photographs show surface and profile differences.

How asphalt shingles keep water out of a Colleyville roof

Close-up of a lifted shingle edge in low sunlight
A lifted shingle edge in low sun. Illustrative photo.

A shingle roof isn’t sealed like a membrane. It sheds water. Each course overlaps the one below it, so rain runs down the surface from shingle to shingle and off the edge without meeting a joint it can get into.

A strip of adhesive on each shingle bonds it to the course below once the sun warms it. That bond is what holds tabs down in wind. Nails go in a marked zone just above it, where the next course covers them. Nails set too high miss the layer below, and the shingle can slide or blow off.

The overlap only works with enough slope. On a low-pitched section, such as some porch roofs and additions, water moves slowly enough to work sideways under the shingles, and a membrane roof is the better choice there.

How asphalt shingles age on a Colleyville roof

Heat, sun and hail do the wearing here. Knowing what that looks like helps when you’re deciding between a repair and a new roof.

Granules wash off

Granules shield the asphalt from sunlight. Some grit in the gutters is normal on a new roof. Bare, dark patches on an older one mean the asphalt is exposed and drying out.

Shingles go brittle

Years of heat cook the oils out of the asphalt. A shingle that once bent now cracks when it’s lifted, which is what turns a simple repair into a bigger one.

Seals let go

Once the adhesive strip releases, from age or a wind event, tabs lift in every strong gust. Lifted tabs crease, and creased shingles shed granules along the fold.

Hail leaves bruises

A hail strike knocks granules loose and can crack the mat under them. Impact-rated shingles are built to take those hits better, which is why they come up after storm damage. No shingle is hail-proof.

Shingle performance and installation in a Colleyville roof project

Impact performance

Look for the rating on the specific product being proposed. “Architectural” describes a style of construction; it does not by itself mean impact-resistant. Ask your insurer about any product-specific discount rather than assuming one.

The installed system

Underlayment, starter, ridge treatment, fastening and flashing all have a role. Shingles on a low-slope section may be unsuitable even when the same material works on a steeper main roof.

Appearance in context

A small sample can look different across a large roof, beside brick and under daylight. Product color, texture and the house’s roof geometry all affect the finished view.

Warranty terms

Compare who covers the product and who covers installation. The roof warranty guide explains the distinction and the terms worth checking.

Colleyville shingle FAQs

Are architectural shingles always impact-resistant?

No. Architectural describes layered construction and appearance. Impact performance belongs to the tested product. Read the exact product specification instead of inferring a rating from its shape.

Can new shingles match an old repair area?

Color changes from weathering and changes in product lines can limit an exact visual match. Compatibility and a sound installation detail remain necessary even when a repair is less conspicuous from the ground.

How do shingle choices affect replacement cost?

Materials can change the budget, but so do roof area, complexity and the work beneath the covering. The cost planner uses the same stated area to compare broad material planning ranges.

Choose shingles as part of the roofing project.

A free inspection puts the material choice alongside the roof’s condition, slope and connections. Start there when you are planning a replacement.

Call (817) 391-7321

Request a free roof inspection

Tell us where the roof is and what you noticed.